Hammond Manufacturing 2/26/2018Hammond Electronics has extended its power distribution offering with an additional 12 variants of rack mounting and stand-alone 100 – 240VAC, 50/60Hz 10A power strips, designed for use with IEC power cords.
Hammond Manufacturing Blog
- Hammond Manufacturing
Hammond Manufacturing Blog
Hammond Manufacturing 8/8/2017Sealed enclosures are designed for indoor or outdoor installation, and they will normally have holes positioned outside the sealed area to enable the enclosure to be attached directly to flat surfaces without compromising the environmental protection.
Hammond Manufacturing 5/12/2017If you're in Canada, every contractor knows and usually prefers the Robertson (square head) screw head. Known for its tapered square head the Robertson screw head offers a lower risk of stripping during installation. In other countries the Robertson screw head is growing in popularity but the Phillips screw head continues to dominate by preference.
Hammond Manufacturing 4/2/2014Hammond's new "1182" line of toroidal power transformers are smaller, lighter, more efficient, and less expensive than older designs. With all of our agency approvals, customers can feel comfortable using them anywhere in the world, plus color-coded leads make it easy for existing users to make the switch from our 182 series.
Hammond Manufacturing 3/28/2014Introducing a new enclosure designed for the Raspberry Pi microcomputer by your friends at Hammond. This nifty addition to the 1593HAM series includes wall-mounting slots, GPIO access, and two different camera mounting options! They're in stock now!
Hammond Manufacturing 3/24/2014Hammond moves to new and improved Silver Zinc Steel Plate treatment for all mounting rails and applicable accessories. This is a rolling change and the traditional yellow Zinc plating is available while supplies.
Hammond Manufacturing 1/2/2014Hammond's new HWSSHK 304 and 316L stainless steel wallmount enclosures are available in a market-leading 30 sizes, ranging from 24” x 20” x 6” to 60” x 36” x 16”. They offer excellence corrosion resistance that does not degrade after scratching or other surface damage with high resistance to chemical attack.
Hammond Manufacturing 11/25/2013Hammond Manufacturing has launched a range of design-specific moulded enclosures to support the new types of credit card sized, low cost bare board computers, which, typically running Linux, provide basic functionality across a wide range of applications.
Hammond Manufacturing 11/1/2013We've expanded our popular line of aluminum utility enclosures to include flanges for easy mounting to walls or other equipment. These new models, 30 in all, are available with a smooth black powder coat or unpainted, paper-covered aluminum.
Hammond Manufacturing 10/21/2013GUELPH, ON - Hammond Manufacturing Co. Ltd. (TSX: HMM.A) launches its new adjustable depth pivoting wall mount rack, a new addition to its already popular line of wall mount racking products. The new Hammond Wall Mount Rack (HWMR) was designed to easily mount network equipment in IT environments with limited floor space.
Hammond Manufacturing 6/29/2013Hammond Manufacturing has introduced its new HJH Series, a family of hinged cover metal enclosures, environmentally sealed to NEMA Type 3R, 4 (IP66), 12 and 13. Designed for wall or bulkhead mounting, the HJ H Series is ideal for housing electrical and electronic equipment in installations where dust and/or water protection is required.
Hammond Manufacturing 12/3/2012We're happy to introduce our new 1599 Tablet Enclosures. They're molded from flame retardant black or gray ABS plastic, and feature an ergonomic design which is comfortable in the hand. These enclosures are perfect for modern touch screen applications and are available with or without battery compartments for your convenience.
Hammond Manufacturing 10/15/2012The Series 2000 console range from Hammond Manufacturing which enables complex control desks to be created from standard parts is now available in both RAL7035 light grey and stainless steel. The system allows units to be stacked in multiple combinations to provide equipment support and display functions exactly where they are required.
Hammond Manufacturing 9/13/2012Hammond Manufacturing continues to expand the breadth of enclosures constructed from 316 stainless steel. A complete line of junction boxes, pushbutton boxes, wallmount, floormount and freestanding enclosures complemented with accessories such as air conditioners are now available in this most durable material.
Hammond Manufacturing 9/13/2012Hammond Manufacturing has introduced an online configuration tool for its HME Series of modular freestanding enclosures, the Q-Assembly service, www.q-assembly.com. The tool is simple and logical to use. It guides the specifier from the initial selection of the required cabinet design and its size, though the selection of options and accessories to the generation of a bill of materials and a quotation.
Hammond Manufacturing 6/1/2012Designed for use in both industrial and office environments, the Eclipse Dual Access wall mounted cabinets from Hammond Manufacturing provide a rigid and strong enclosure for high-density LAN cabling and 19” patch panels as well as for any 19” electronic equipment.
Hammond Manufacturing 5/7/2012Hammond Manufacturing offers a number of versions of floor mounted and freestanding stainless steel enclosures designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. The units will typically be installed in oil and gas facilities, water treatment plants, food manufacturing plants, pharmaceutical production and other industries where equipment may be hosed down or otherwise be very wet, or in applications where corrosion is a serious problem.
Hammond Manufacturing 3/23/2012GUELPH, ON - Hammond Manufacturing Co. Ltd. (TSX: HMM.A) launches their new low-profile wall mount cabinet, a new addition to its already popular line of wall mount racking products. The new Hammond Low-Profile (HLP) cabinet introduces several features where similar cabinets fall short.
Hammond Manufacturing 3/6/2012Designed for use in harsh industrial environments where electronic or electrical equipment, electrical switchgear, hydraulics or pneumatic controllers must be isolated from oil, water and dust, Hammond Manufacturing’s Eclipse Series of wall mount enclosures is fabricated from type 304 stainless steel for strength, durability and superior corrosion resistance.
Hammond Manufacturing 2/7/2012GUELPH, ON - Hammond Manufacturing Co. Ltd. (TSX: HMM.A) - The next time you are heading to your favourite DataComm distributor to purchase a Hammond Rack or Cabinet, you may notice a new line of products offered by Hammond. Hammond’s new line of rack and cabinets named RACK BASICS will offer contractors with a quality economy option at a competitive price.
Hammond Manufacturing 9/26/2011The new AA, A and C sizes added to the 1553 family of soft-sided hand held enclosures all feature an ergonomic curved shape that fits comfortably into the hand. The AA measures 75 x 50 x 17mm, the A 100 x 61 x 17mm and the C size, available with or without a battery compartment is 117 x 79 x 33mm.
Hammond Manufacturing 9/26/2011The latest addition to Hammond's extensive selection of die-cast enclosures is the 1550Z family, a range of thick wall (3 to 4mm depending on size) IP66 sealed boxes for use in applications where impact protection and environmental sealing are primary requirements.
Hammond Manufacturing 8/29/2011With the recent seismic event in Virginia, USA, it is a subtle reminder of the importance of installing seismic rated data center cabinets. The Hammond C4 and DC100 cabinet series offer fully welded frames constructed of 14 ga steel and re-enforced with 12 ga corner brackets.
Hammond Manufacturing 5/3/2011Hammond Manufacturing Co. Ltd., is pleased to introduce their new type 12 modular cabinet system. Designed and developed in North America the HME provides a vast array of features and advantages supported by Hammond’s commitment to providing quality products and service excellence.
Hammond Manufacturing 4/29/2011Each issue we showcase unique and useful product modifications. Recently, Hammond Mfg produced a special 30inch wide cabinet that included an extra-wide passive air chimney. In addition, the entire cabinet was painted in reflective white.
Hammond Manufacturing 1/25/2011If you have ever dropped a 100-pack of our mounting hardware you may have been frustrated by the screws cascading across your floor. We listened to your concerns and we are pleased to introduce our new packaging for our entire mounting hardware line.
Hammond Manufacturing 11/26/2010
In October we completed a Data Center Cabinet that included an adjustable passive air-flow chimney. This passive top chimney features a knockdown design that can be assembled on-site.
Hammond Manufacturing 10/29/2010The Hammond Fixed Wall Bracket (FWB Series) is a new light duty single hinged wall bracket. The FWB offers a simple design with universal keyhole wall mount provision and large rear cable access. Perfect for mounting keystone jacks and other narrow equipment, the FWB is available in mounting heights 1U, 2U and 4U.
Hammond Manufacturing 10/10/2010We're happy to announce that we have expanded our line of soft-sided, hand-held enclosures! The 1553 "T" series are molded from flame retardant ABS plastic, and include integral brash bushings which make them tough enough for repeated assembly and dis-assembly. Available with or without a battery compartment and door, these stylish and versatile enclosures are perfect for applications where a display and keypad are needed.
Hammond Manufacturing 8/6/2010The Hammond Rack Mounted Monitor Bracket (RMMB Series) enables you to quickly mount a flat panel screen to a 19" rack. Whether you need a diagnostic screen on your rack/cabinet or wish to integrate your plasma and equipment rack together.