These magnetic bearingless encoders are wear resistant and extremely durable. Their compact shape is especially suitable for tight installation spaces. In contrast to encoders with bearings, magnetic bearingless encoders can be designed with a large hollow shaft up to 390 mm, which in turn facilitates the best possible integration of bearingless encoders for any application.
These inclinometers were specially designed for outdoor use. The rugged housing, high protection rating and wide temperature range reinforce their reliability. Their low profile facilitates simple and flexible installation. The special feature of the IN81 / IN88 is its high precision, which remains stable even in harsh environments and during temperature fluctuations. The result is a consistent and optimum measurement for your system.
Frequency: f (kHz) ? f (Hz)
Frequency divider: HTL ? TTL; TTL ? HTL
Level converter: SinCos ? HTL / TTL; SSI ? HTL / TTL;
f (kHz) Analog; SSI Analog
Signal converter: ? 2x SinCos, 2x TTL / HTL;
2x TTL / HTL ? 2x TTL / HTL
Draw-wire C100 & D125. Length and inclination measurement with one single device! Draw wire system with integrated inclinometer. Measuring range up to 10 m
Extremely robust and cost-effective Draw wire encoder D120 for outdoor applications. Measuring range 3-10 m
This leads to the question of the suitable interface for the application. Safety-oriented interfaces and single-cable technology belong currently to the main innovation trends in the electrical drive technology. Kübler follows this trend with new encoder solutions.
New EtherCAT singleturn and multiturn encoders in the robust Sendix design now complement the versatile Sendix absolut family from Kübler. Kübler is thus responding to the increasing importance of the new field bus generation with Ethernet technology.
New highly robust Absolute Singleturn encoder in compact 36mm format, with magnetic sensor technology from Kübler
The 3650 and 3670 series from Kübler offer a resolution of 9 bit with SSI, 4.. 20mA or 0 ..10V output. There is a suitable measuring range (45°, 90°, 180° or 360°) for every application. The encoders are particularly robust, compact and versatile.
If there is no more room for an encoder - then the answer lies in the rotary measuring system with magnetic rings from Kübler
The new magnetic rings RI20 from Kübler, combined with the proven LIMES sensor head, offer a particularly compact incremental rotary measuring system, ideal for installation areas where space is very tight.
DIGITRONIC Automationsanlagen GmbH, whose main business is the development and production of cam controls with the corresponding accessories, and Fritz Kübler Zähl- und Sensortechnik GmbH, manufacturer of encoders and counters, have formed a strategic partnership.
The new Profibus encoders are available either as singleturn with up to 16 bit resolution or multiturn with up to 28 bit resolution, all offering up-to-the-minute fieldbus performance in the application thanks to the latest Profibus-DPV0 profile and enhanced programming possibilities.
A New Age of Absolute Encoders from Kubler - Safer, faster and more versatile than previously available in the market
Kübler is ringing in a new age of absolute encoders with the new Sendix product family.
With its so-called "bearing block," Kübler has developed a quite specific solution for prolonging the service life of encoders.
Kübler is setting new standards with its latest generation of incremental encoders. These versatile devices deliver high performance and offer the customer a wide spectrum of use as per the slogan “more compact, more varied and more sophisticated”.
Whether for controlling the speed and position of drives or for shaft copying or monitoring overspeed limiters, encoders are at the very heart of sensor technology in the world of lifts.
Kübler's absolute multiturn encoders have won for themselves a market-leading position thanks to their top-class technical performances.
Despite their high level of reliability when used in an industrial environment, encoders are not basically immune to all the stresses and strains imposed on them. So, for example, the high precision opto-electronic measuring systems are sensitive to bearing currents.
When encoders are used in environments, which are particularly prone to interference, then they need a connection system that ensures faultless data transfer even under adverse conditions.
Powerful, compact and rugged - this is how the new incremental encoders from Kübler can best be described.
In the area of linear measuring technology, Kübler has just extended its wide range of draw-wire actuators with a new maxi draw wire that comes with up to 40 metres wire length. Kübler can now offer just the right draw wire solution for all conceivable standard lengths & distance measurements in machinery and plant construction.
Kübler's new A02H series of heavy duty incremental encoders with large hollow-shaft fills an important hole in the market.
The rugged miniature 2400/2420 series of encoders from Kübler now also meet the more stringent standards EN 50121-3-2 and EN 61326-1 (commonly referred to as the 'railway standards').
The new CODIX 538 from Kübler can be integrated without difficulty into any CAN or CANopen network in order to display locally any user-defined value. Numerical values can be directly scaled using a factor or offset from the display device. The display has a floating decimal point that can be inserted in any position.
The new universal preset counters Codix 923/924 from Kubler, are now available with multi-colour LED-look display.
With its new Position and Difference Preset Counter Type 572 Kubler is presenting a counter series, with two individually scalable encoder inputs, suitable for a wide range of challenging tasks.
The new universal preset counters CODIX 923/924 from Kübler, designed to display, measure and control pulses, time and frequency, excel with their versatility, practical extra functions and convenient operation.
Kubler is introducing a completely new class of device class in the form of its HW 66 and SHW 76 meters: the combination of time and energy meter in a single device.
Lots of new functions, higher performance, compact design and even easier to operate - these are the trademarks of Küblers new improved CODIX displays from their 52X Series.
Kubler helps increase the reliability of kWh meters and save on costsIn a number of countries manufacturers of kWh meters now have to offer a long-term warranty on their products.
Lots of new functions, higher performance and even easier to operate - these are the trademarks of Kubler’s new improved CODIX displays from their 54X Series.
The patented K-series electromechanical micro counters from Kubler are the only such products on the market that are shockproof and at the same time 100 percent resistant to magnetic fields.
Kubler, the market leader in counters for energy metering, once again gives proof of its skills and expertise: alongside the classic micro counters in its K-Series the company offers high-quality cyclometer displays with stepper motor drive for electronic kWh meters.
With its new Setpoint Generator CODIX 533, Kubler is adding to its CODIX family of displays an output device for analogue voltages and currents, designed to open up new application possibilities in the fields of process technology and automation.
Process indicators and controllers for analogue input signals - with interfaces for easy programming
Kubler presents six new process indicators and process controllers, in DIN format 96 x 48 mm, equipped with RS232 and RS485 interfaces. The real advantage for the user is that the units can be programmed via these interfaces and that programmed data can be called up and then further processed.
Sophisticated process displays and controllers for analogue input signals - multitalented and user-friendly
With design and technology in mind, multifunctional and easy to handle, the Kübler Codix-Process Displays have always been highly appreciated by their users. Now the company presents these devices optimized with even better functions and operational possibilities.
Kubler from Germany presents two new micro processor based temperature indicators (Codix 531, 532) for resistance temperature measurement and thermocouple sensors.
New standards apply since September 1st, 2017 for all passenger and cargo elevators. The standards EN 81-20 and EN 81-50 have entered into force.