Push Buttons

Edwards Signaling provides a wide range of contact devices for residential, commercial and OEM applications. Door Holders, contact, push button and door switches can all be used to activate signals and accessories for security and fire alarm system solutions too! These rugged, good-looking switches silently do their part to keep you safe day-in and day-out.

Edwards 236 Series Door Trip Distributors
236 Series

Edwards Signaling Catalog 236 door trip is a low voltage contact device for external mounting. The device makes and breaks as the door opens. Signals door entry into stores, offices, etc. Edwards Signaling 236 series door trip is non insulated, low voltage & Zinc plated.

Edwards 250 & 255 Push Buttons Distributors
250 & 255

Edwards Signaling Catalog 250 is a low voltage, high amperage push button designed for simultaneous operation of two or three devices from one central point. The Catalog 255 is a low voltage, high amperage push button designed for use where the simultaneous breaking of one circuit and the making of another is required. Use wherever a low voltage, high amperage, economical push button are required.

Edwards 44, 45 & 46E Rolling Ball Contactors Distributors
44, 45 & 46E

Edwards Signaling Catalog 44, 45 and 46E rolling ball contactors are insulated, rugged devices that operate from pressure in any direction. Installation requires no mortise. For use on doors, windows, transoms, burglar alarms, and machinery. The Cat. No. 46E is ideal for applications where a momentary contact is desired such as door chime entry applications.

Edwards 501A-G, 502A & 503A Door Light Switches Distributors
501A-G, 502A & 503A

Edwards Signaling Cat. No. 502A and 503A electric door switches are available as either normally open or normally closed units. The switch mounts using the mounting holes on 3 1/4" (83mm) centers. The Cat. No. 501A-G may be wired either normally open or normally closed (shipped normally closed). The switch mounts using the mounting holes on 3" (76 mm) centers. Use for closet doors, dark rooms, and walk-in refrigerators. May be used on either sliding or hinged doors.

Edwards 59 Series Push Buttons Distributors
59 Series

Edwards Signaling 59 series low voltage, high amperage push button designed for 3/4" (19 mm) hole force fit. Flat white button center prevents accidental operation. Use wherever a low voltage, high amperage, economical push button is required. Edwards Signaling 59 series push buttons have normally open momentary contacts.

Edwards 600 & 603 Series Push Buttons Distributors
600 & 603 Series

Edwards Signaling 600 & 603 series low voltage push button is an attractive, traditional push button designed for long service. Use for home, apartment and office. Edwards Signaling 600 & 603 series low voltage push buttons feature solid brass housing and black button.

Edwards 600 Series Push Buttons Distributors
600 Series

Edwards Signaling 600 series low voltage push buttons' patented piano-action design requires only the slightest touch. This modern, slim design can be easily installed in minutes. For home, apartment, office, and OEMs. Use wherever low voltage, economical remote control is required.

Edwards 602 & 605 Series Push Buttons Distributors
602 & 605 Series

Edwards Signaling 600 Series are traditional push buttons in a single stamped plate, designed for long service. They feature solid brass construction. Edwards Signaling 602 & 605 series low voltage push buttons are used for homes, apartments and offices. 602 Series has dual buttons & two name card holders. 605 Series has three buttons & three name card holders.

Edwards 60 Series Magnetic Switches Distributors
60 Series

Edwards Signaling 60 series magnetic switches are designed to activate a variety of signaling devices. Normally open circuits close when the magnet engages. SPDT switches are for open circuit systems and/or closed circuit systems. Normally closed circuits open when the magnet engages. For accessories, see Magnetic Switch Accessories. Used for commercial, industrial, and residential burglar alarm systems.

Edwards 620 Series Push Buttons Distributors
620 Series

Edwards Signaling low voltage, panel mount push buttons with large terminals. Available with an illuminated center for use in unlighted areas. Use for low voltage, low cost, industrial and commercial applications requiring long life. May be used with the Cat. No. 147-1 mounting plate or 147-10 room annunciator mounting plate.

Edwards 656 Series Push Buttons Distributors
656 Series

Edwards Signaling 656 series deluxe low voltage illuminated push button's polished housings with exclusive, patented piano-action design that requires only the slightest touch. This modern, slim design can be easily installed in minutes. For home, apartment, office, and OEMs. Use wherever low voltage, economical remote control is required.

Edwards 66, 67 & 68 Magnetic Switch Accessories Distributors
66, 67 & 68

Edwards Signaling magnetic switches are designed to activate a variety of signaling devices. Edwards Signaling 66, 67 & 68 magnetic switch accessories can be used to functionally augment these switches. Edwards Signaling magnetic switches are used for commercial, industrial, and residential burglar alarm systems.

Edwards 690 Series Push Buttons Distributors
690 Series

Edwards Signaling 690 series low voltage, panel mount push buttons with three types of centers: recessed, flush, or protruding. Each button has a phosphor bronze contact spring with a long duration wiping action. The button back is constructed of Zytel 101 nylon. Used for push button panels, on industrial and commercial machines, and on OEM equipment. Use wherever an extra long life, high quality, low voltage push button is needed. May be used with Cat. No. 147-1 mounting plate.

Edwards 71 Series Push Buttons Distributors
71 Series

Edwards Signaling 71 Push Button is a pendant type button. It is small, yet easy to grasp, and is contained within a tough plastic case. For use in hospitals, institutions, and OEMs where a locking push button is not required. Edwards Signaling 71 Push Button has a gray rim, Ivory center & low voltage - up to 50 volts.

Edwards 78 Series Manual Emergency Pull Station Distributors
78 Series

Edwards Signaling Catalog No. 78 pull station is a low voltage device used to perform emergency shutdown of equipment or alert personnel to dangerous conditions. For replacement glass rods, order Part No. P-027024. For use in factories to shut down equipment or production lines in the event of an emergency. Also used to alert personnel to a dangerous condition or to signal personnel evacuation in the event of an emergency. The 78 may be surface mounted or mounted on a gem box or single gang plaster cover.

Edwards 147 Series 147-1 Push Buttons Distributors
147 Series 147-1

Edwards Signaling 147 Series 147-1 Push Button Switch Plate is used for mounting 620 and 690 series 5/8" (16mm) push button switches (purchased separately) on a standard single gang box. Edwards Signaling 149 Series 149-1 Push Button Plate is used for mounting 821, 850, and 854 series 7/8" (22mm) buttons on a standard single gang box.

Edwards 147 Series 147-10 Push Buttons Distributors
147 Series 147-10

Edwards Signaling 147-10 Push Button Plate is a stainless steel faceplate, and is used with the catalog series 620 Push buttons (purchased separately) to form a convenient station that provides a means of activating a hotel room annunciator for the hearing impaired. Designed for single gang mounting. Supplied as part of the 7005-G5 Hotel Room Annunciator.