10M168N8 Parker Adapter Fitting
- Applicable Standard: ISO 9001
- Application: Chemical/Petrochemical, Oil and Gas, Research
- End Connection: Male Threaded x Female Threaded
- Material: 316 Stainless Steel
- Pressure Rating: 15000 PSI
- Process: Cold Worked
- Size A: 1 in.
- Size B: 1/2 in.
- Temperature Rating: -423 to 1200 Deg F
- Product Type: Adapter
- Refine Search: Reducing
Parker Adapter Fitting, 1" x 1/2", MPT x FPT, 15000 PSI, Cold Worked, 316 Stainless Steel, Reducing, Male Adapter.
Ball Valve; Type 2-Way, 3-Piece, Swing-Out; Actuation Type Lever Handle; Nominal Size 3/4 Inch x 3/4 Inch; End Connection A-LOK Double Ferrule Compression x A-LOK Double Ferrule Compression; End to End Distance 4.06 Inch; Ball Material ASTM A276 316 Stainless Steel; Body Material ASTM A351 Grade CF3M Stainless Steel; Stem Material ASTM A276 316 Stainless Steel; Seat Material Glass Reinforced PTFE; Seal Material Nitrile Rubber; Handle Material Black Vinyl Covered ASTM A276 304 Stainless Steel; Temperature Rating -65 to 450 Deg F (Seat), -40 to 250 Deg F (Seal); Pressure Rating 2500 PSIG; Inclusions/Features 304 Stainless Steel Packing Gland/Stem Hex/Grounding Spring, 301 Stainless Steel Seat/Stem Spring, PEEK Thrust Washer; Application Steam/Process Line, Wash Down/Lubrication System; Orifice Diameter 0.56 Inch; Flow Capacity 14.7 CvFeatures/Benefits
Ultra Low Internal Volume; Free Floating Ball Design Allows for Seat Wear Compensation; Self-Compensating Stem Seal; Spring-Loaded Seat; Blow-Out Resistant Stem; Fully Enclosed Body Bolting; Four Bolt Construction; ISO-Type Actuator Mounting Design; 100% Factory TestedSeries/Model Information
Parker's SWB Series, Swing - Out Ball Valves are a three piece design. These instrumentation ball valves are durable valves that can handle various low pressure (2,500 PSI) pressure tubing and piping loads. The ball valve's center body section can swing out provide quick and easy valve seat, seals and the ball replacement. All of this repair capability is without having to remove the valve from the instrumentation tubing or piping system.Inclusions
316 Stainless Steel End Connector/Plug/Seat Retainer/Handle Pin/Handle Set Screw