20813Y Fairchild Products Model 20 Pneumatic Precision Booster 1:1 ratio

$201.27 / Each
  • Product Type: Pneumatic Precision Booster
  • Accuracy: 0.15 psi
  • Sensitivity: 1/4 in WC
  • Supply Pressure: 250 psi
  • Pressure Range: 0-150 psi
  • Flow Capacity: 45 SCFM
  • Pipe Size: 3/8 FPT
  • Body Material: Aluminum
  • Elastomer: Nitrile on Dacron
  • Ambient Temperature: -40 F (-40 C) to 200 F (93.3 C)
  • Base Model: 20813
  • Exhaust Capacity: 11 SCFM [18.7m3/Hr] where downstream pressure 5 psi above output pressure set @ 20 psi
  • Exhaust Type: Straight (standard)
  • FlowCv: Approximately 1
  • Mounting: Wall (order 09921 bracket below)
  • Operator: Pneumatic pilot signal
  • Options: [Y] Negative bias fixed
  • Ratio: 1:1
  • RatioAccuracy: 1.0 pct of 100 psi output span

Fairchild Model 20 Pneumatic Precision Booster, 1:1 ratio, 250 psi [17 BAR] supply, 45 SCFM [76.5m3/Hr]@100 psi/20 psi, 150 psi [10 BAR] max output, 3/8 FPT line, 1/4 FPT gauge, 1/4 FPT signal, Nitrile on Dacron, negative bias fixed.

Browse All Model 20 Products

Browse All Fairchild Industrial Products Products


Contact Our Process Control Experts

Contact our experts to answer questions or help you with your application needs.


  • Distribution of components services
  • On-site inventory management
  • Factory Automation Services
  • Product expediting
  • Product obsolescence notifications and replacements
  • Kitting and packaging
  • Custom labeling

Product Description

The Rotork Fairchild Model 20 Volume Booster is a smaller pneumatic device capable of high flow and exhaust capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. With its pilot operated regulator design, the M20 handles up to 150 psig [10 BAR] (1000 kPa) supply pressure and has ten available ratios to cover a wide range of applications. The M20 Booster provides a flow capacity of 45 SCFM [76.5m3/Hr], which equates to a Cv factor of approximately 1.0 in forward mode.
  • Provides fast responsive operation
  • Easily suits your downstream pressure requirements
  • Allows tuning for optimum dynamic response (1:1 ratio only) and cycle free operation with valve positioners
  • Facilitates use with pneumatic signal devices that cannot be adjusted to zero signal pressure
  • Eliminates hunting and buzzing
  • Easy installation in the field
  • Allows servicing the Model 20 using Service Kit without removal from line
  • Suitable for use in all Canadian territories and provinces
NOTES: Oil free air must be applied to the regulator. Use a filter to remove dirt and entrained liquid in the air line ahead of the regulator. If an air line lubricator is used, it MUST be located downstream of the regulator, to avoid interference with regulator performance.