6F-B8LJ-SSP-C3 Parker Ball Valve
- Actuation: 1/4 Turn Lever Handle
- Ball Material: 316 Stainless Steel
- Body Material: ASTM A351 Grade CF3M 316 Stainless Steel
- Handle Material: Black Nylon 6/6
- Seal Material: PTFE
- Seat Material: PTFE
- Stem Material: ASTM A276 316 Stainless Steel
- Temperature Rating: -65°F to 350 °F
- Application: Flow Diversion/Selection, Instrument Panel, Process Mixing System, Quick Fill System, Remote Shut-Off
- End Connection: Female Threaded x Female Threaded
- End To End Distance: 3.9 in.
- Nominal Size: 3/8 in. x 3/8 in.
- Pressure Rating: 1500 PSIG
Parker B8L Series Ball Valve, 3/8" x 3/8", FPT x FPT, 1500 PSIG, 316 Stainless Steel, PTFE Seal, Black 1/4 Turn Lever Handle, 2-Way, In-Line, Panel Mount, Ball Valve for Oxygen Service.
Relief Valve; Type Adjustable Pressure, Angle; Inlet Size 1/4 Inch; Outlet Size 1/4 Inch; End Connection A-LOK Double Ferrule Compression x A-LOK Double Ferrule Compression; Body Material ASTM A182 F316 Stainless Steel; Spring Material 17-7 Stainless Steel; Seal Material Nitrile Rubber; Temperature Rating -30 to 225 Deg F; Pressure Rating 6000 PSIG CWP, 350 to 750 PSIG (Cracking); Inclusions/Features PTFE Back-Up Ring/Washer, 316 Stainless Steel Cap/Upper Stem/Bonnet/Lower Stem/Seat Retainer/Stem Guide/Handle Stem/Locknut, Nitrile Rubber Stem Seal/Seat, Zinc Plated Steel Plug, Phenolic Handle; Application Process Control Line, Research Equipment, Monitoring Line; Actuation Type Manual Overdrive Handle; Hex Size 7/8 Inch and 1 Inch; Orifice Diameter 0.14 Inch; Flow Capacity 0.41 CvFeatures/Benefits
Pressure Settings are Externally Adjustable While the Valve is in Operation; Multiple Spring Ranges Provide Greater System Sensitivity and Enhanced Performance; Captured Molded Seat Design is Blow-Out and Chip Resistant; Color Coded Springs and Labels Indicate Spring Cracking Range; Lock Wire Feature Secures a Given Pressure Setting; Back Pressure has Minimum Effect on Cracking PressureSeries/Model Information
Parker R Series Relief Valves are unique since they offer both a low pressure valve line (RL4) and a higher pressure valve line (RH4). They are both designed such that when the upstream pressure exceeds the closing force exerted by the spring, the lower stem opens, permitting flow through the valve. Flow through the valve increases proportionately to the increase in upstream pressure. These relief valves work from 1-25 psig crack pressure systems up to 5,000-6,000 psig crack pressure systems. The highly visible color coded labels on the valves indicate the associated crack pressure spring included in the valve.Inclusions
PTFE Connector O-Ring/Retainer Seal/Stem Seal, 316 Stainless Steel Ball/Stem Washer/Panel Mounting Nut/Seat Retainer/End Connector/Packing Nut, Stainless Steel Handle Set Screw, PCTFE Seat