D4N-4162-NPT OMRON Safety Limit Switch
- Actuator/Head Type: 1-Way Horizontal Roller Arm Lever
- Approval: CCC, CE, CSA C22.2, TUV, UL (Canada and US)
- Connection Type: (1) M20 Threaded Conduit
- Contact Configuration: 1NC/1NO
- Contact Rating: 3/10 A at 250 VAC (Resistive)
- Differential Travel: 1.5 mm
- Enclosure: IP67
- Operating Force: 5 Newton
- Operating Temperature: -30 to 70° C
- Operating Travel: 5 mm
- Operation Type: Snap Action
- Pretravel: 4 mm
- Total Travel: 9 mm
- Refine Search: Safety Switches
- Product Type: Limit Switch
OMRON D4N Series Safety Limit Switch, 3/10 A at 250 VAC, 1NC/1NO, 1-Way Horizontal Roller Arm Lever Actuator, NPT Conduit Connection, Snap Action, IP67, Safety Limit Switch.
Contact Our Motion Control & Automation Experts
Contact our experts to answer questions or help you with your application needs.
Services
- Control & Automation Engineering
- Control Panel Services
- Control System Design
- Machine Vision Services
- Maint/Repair Service Contracts
- PLC Services
- Rexroth Indramat Repair Center
Product Description
Frequency Rating 50/60 Hertz; Contact Resistance 25 Milli Ohm; Release Force 0.8 Newton; Operating Position 37 +/-0.8 Millimeter; Applicable Standard EN50047/60204-1/1088/60947-5-1, GS-ET-15, GB14048.5
DescriptionSafety Limit Switch; Contact Rating 3/10 Amp at 250 Volt AC (Resistive); Contact Configuration 1NC/1NO; Actuator/Head Type 1-Way Horizontal Roller Arm Lever; Operation Type Snap Action; Operating Force 5 Newton; Total Travel 9 Millimeter; Operating Travel 5 Millimeter; Pretravel 4 Millimeter; Differential Travel 1.5 Millimeter; Connection Type (1) M20 Threaded Conduit; Operating Temperature -30 to 70 Deg C; Enclosure IP67; Approval UL (Canada and US), CSA C22.2, CE, CCC, TUV; Frequency Rating 50/60 Hertz; Contact Resistance 25 Milli Ohm; Release Force 0.8 Newton; Operating Position 37 +/-0.8 Millimeter; Applicable Standard EN50047/60204-1/1088/60947-5-1, GS-ET-15, GB14048.5
Features/BenefitsStandardized Gold-Clad Contacts Provide High Contact Reliability; Grooves Which Engage the Lever are Cut in the Lever and Rotary Shaft to Prevent the Lever from Slipping Against the Rotary Shaft; The Built-In Switch has a Direct Opening Mechanism; That Forcibly Separates the NC Contact Even When there is Contact Deposit; The Cover with a Hinge on its Lower Part, Can be Opened by Removing the Screw of the Cover, Which Ensures Ease of Maintenance and Wiring; The Direction of the Switch Head Can be Varied to any of the Four Directions