NX-PD1000 OMRON Automation Controller Power Supply

NX-PD1000
$81.00 / Each
  • Product Type: Power Supply
  • Product Family: NX Series
  • Input Power: 10 W
  • Input Voltage Range: 20.4 to 28.8 VDC
  • Mounting: Panel
  • Nominal Input Voltage: 24 VDC
  • Operating Temperature: 0 to 55 Deg C
  • Size: 12 mm W x 71 mm D x 100 mm H
OMRON NX Series Automation Controller Power Supply, 20.4 to 28.8 VDC Input 10 W Input, Panel Mount, Automation Controller Power Supply.
QTY

Contact Our Motion Control & Automation Experts

Contact our experts to answer questions or help you with your application needs.

Services

  • Control & Automation Engineering
  • Control Panel Services
  • Control System Design
  • Machine Vision Services
  • Maint/Repair Service Contracts
  • PLC Services
  • Rexroth Indramat Repair Center

Product Description

Humidity Rating 10 to 95 Percent; Altitude 2000 Meter; External Connection Type Screwless Push-In Terminal Block (8-Terminal); Efficiency 70 Percent; Insulation Resistance 20 Mega Ohm; Dielectric Strength 510 Volt AC at 5 Milliamp; Applicable Standard ANSI/ISA 12.12.01, EN 61131-2

Description

Automation Controller Power Supply; Input Voltage Range 20.4 to 28.8 Volt DC; Nominal Input Voltage 24 Volt DC; Input Power 10 Watt; Operating Temperature 0 to 55 Deg C; Mounting Panel; Size 12 Millimeter Width x 71 Millimeter Depth x 100 Millimeter Height; Humidity Rating 10 to 95 Percent; Altitude 2000 Meter; External Connection Type Screwless Push-In Terminal Block (8-Terminal); Efficiency 70 Percent; Insulation Resistance 20 Mega Ohm; Dielectric Strength 510 Volt AC at 5 Milliamp; Applicable Standard ANSI/ISA 12.12.01, EN 61131-2

Features/Benefits

Units to Feed in Additional Unit Power and Input/Output Power to an NX-Series Remote Input/Output Terminal; The NX Unit Power Supply Unit Allows Expansion of the Input/Output Configuration Beyond the Maximum Power Supply Capacity of the EtherCat Coupler; The Input/Output Power Supply Unit is Used when the Total Allowed Input/Output Current per Feed Terminal is Exceeded or to Split Input/Output Power in to Groups; The Input/Output Power Connection Unit Can be Used as an Additional Power Supply Terminal for Connected Sensors and Actuators; NX Units in the CPU Rack Through the NX Bus Connector