QFG Electric Fan-Forced Wall Heaters

QFG1512T2M
/ Each
Available to Order
Marley Engineered Products QFG, Electric Fan-Forced Wall Heaters, 120 volts, 275/750/1125/1500 watts, built-in thermostat, 3.1/6.3/9.4/12.5 amps, QFG series electric in-wall heaters are suitable for use in almost any room. Use single heaters in smaller rooms such as bedrooms and bathrooms.
  • Product Description
  • Dimension Drawing
RESIDENTIAL: QFG Series electric in-wall heaters are suitable for use in almost any room. Use single heaters in smaller rooms such as bedrooms and bathrooms. Use multiple heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms. Wattage should be determined through heat loss calculations.

COMMERCIAL: Suitable as the primary heat source in smaller rooms and as supplemental heat in almost any general use area.

  • Dual Protection: Thermal cutout with indicator light and one time thermal fuse.
  • Tangential blower for whisper quiet operation.
  • Sienna White baked enamel finish.
  • Open coil element assures quick heat and low maintenance. SELECTION CHART
  • Three piece construction for ease of installation.
  • Permanently lubricated, dust-protected bearings.
MOUNTING LIMITATIONS
For wall mounting only. Do not install back box closer than 4 inches from floor, 6 inches from adjacent walls and 12 inches from the ceiling. Do not install heater behind towel rack, behind door, in floor, in closet, in ceiling or where airflow may be obstructed. To insure proper operation, maintain 5-feet minimum clearance to furniture