PrestoLok Fittings W68PLP Male Connector

W68PLP-4-4
/ EA
Available Stock
Parker Prestolok Fittings W68PLP Male Connector, Low Pressure Fitting Straight, Tube to Pipe, 1/4 x 1/4in, Push to Connect, NPTF, Nickel Plated Brass.
QTY
  • Product Description
  • Dimension Drawing
Prestolok Fittings
Ready-to-use compact one-piece fitting for use with most thermoplastic tubing. This fitting is specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important. No special tools are needed for assembly; just insert the tubing until it bottoms. Prestolok is designed to be used with no tube support. Radial claws on the stainless steel grab ring grip the tubing securely to provide retention. Brass Male pipe threads come standard with a white acrylic sealant pre-applied ("W" prefix) swivels are featured on all male pipe threaded shapes for installation in tight places and for precise positioning. Prestolok should not be used for live swivel applications. The outside diameter of the tubing to be used with the fitting is marked on the release button.

Materials

  • Prestolok Nickel Plated Bodies: CA377, CA360, CA345
  • Prestolok Composite Bodies: Glass Filled Nylon
  • O-Ring: Nitrile (other compounds available on request)
  • Release Button: Polyacetal
  • Grab Ring: Stainless Steel
Assembly Instructions:

    1. Cut thermoplastic tubing squarely, using Parker Tube Cutter PTC-001. Be certain the port or mating part is clean and free of debris.
    2. Insert tubing into fitting until it bottoms. A slight twisting motion will ease the insertion. Pull on tubing to verify it is properly retained in the fitting.
    3. To disassemble, simply push the release button against the body and remove tubing.