Horns

Edwards Signaling vibrating horns are low-current, high decibel, for heavy-duty use and are UL listed to NEMA 4X, NEMA 12 and NEMA 12K enclosure requirements. The die-cast box is suitable for outdoor use and has a durable, corrosion-resistant, electrostatic heat flowed powder epoxy gray finish. Edwards Signaling horns produce sounds designed to alert, warn, communicate and protect.

Edwards 8001-EG/8002-EU Series Horns Distributors
8001-EG/8002-EU Series

Edwards Signaling 8000 Series heavy duty backup alarms answers all your needs with its convenient, compact size, rugged housing and high decibel output. The 8001-EG die-cast alarm automatically adjusts its output volume to 10 dB above ambient to compensate for background noise. Range is 87 to 102 dB. The 8002-EU has an ABS plastic housing and outputs 97 dB. Long Term reliability is ensured as a result of its durable and versatile construction. The alarm mounts in the rear of the vehicle with the sound opening outward into the hazardous area. Designed for indoor and outdoor application in a wide variety of vehicles that operated in populated areas. This alarm is perfect for heavy equipment such as forklifts, bulldozers, graders, tractors, dump trucks, and waste disposal vehicles as well as emergency and maintenance vehicles, buses, firetrucks, and general utility vehicles. The Edwards 8000 Series Backup Alarm is an economical life-safety device designed to prevent accidents.

Edwards 860 Series Horns Distributors
860 Series

Edwards Signaling 860 Series xenon beacons with horns are bright, low current, high decibel, combination signals designed for use where a distinctive visual or audible signal is required. The housing is made of gray, engineered thermoplastic. The strobe and horn can be operated independently. The 867STR (indoor) and 868STR (outdoor) Series can be surface mounted on the supplied surface box. The 869STR and 869DSTR Series beacons can be flush mounted. They are designed to mount in a standard 4" (102mm) square electrical box with extension ring (total min. depth of 3" (75mm) not supplied.) The 869DSTR Series is Diode Polarized for use in electrically supervised circuits.

Edwards 867/869/869D Series Horns Distributors
867/869/869D Series

Edwards Signaling 867, 869 and 869D series are low current, high decibel, surface mount, flush or panel mount electronic horns for indoor use. The 867 series has been designed for surface mounting with the gray, corrosion resistant, surface mount box supplied with the unit. The box measures 5 5/8" (143mm) square by 3 5/16" (84mm) deep. The 869 and 869D series are designed for flush or panel mounting. For flush mounting, they mount to a standard 4" (102mm) square back box with extension ring (total minimum depth of 3" (76mm)). Back box and extension ring not supplied. For panel mounting, use only the supplied mounting plate without back box. The 867 and 869 series electronic horns are designed for use in corridors and manufacturing sites. It is used wherever a distinctive, audible signal is required for timing, scheduling, general alarm, and warning applications. The 869D is designed for use in fire alarm systems and other applications requiring electrical supervision of signaling circuit field wiring.

Edwards 868 Series Horns Distributors
868 Series

Edwards Signaling 868 series is a low current, high decibel, weatherproof surface mount, electronic horn for outdoor or indoor use. It has been designed for mounting with the supplied weatherproof back box. The 868 mounts, using the supplied gasket, to the gray, corrosion resistant weatherproof surface box supplied with the unit. The box measures 5 59/64" (150mm) square by 3 13/32" (87mm) deep. The 868 electronic horn is for indoor and outdoor use wherever a distinctive, audible signal is required for timing, scheduling, general alarm, and emergency warning applications.

Edwards 870/871 Series Horns Distributors
870/871 Series

Edwards Signaling 870 AC & 871 DC Series are low-current, high decibel flush mount vibrating horns for heavy-duty use. It has been designed for wall or panel installation and projects less than 1" (25mm) from the mounting surface. Suplied complete with trim plate. Designed for indoor installation. Horn mounts in Catalog No. 870-B back box (ordered separately). Applications include ceiling and wall mounting in corridors and manufacturing sites. Also, ideal for scoreboards. Used wherever a distinctive, urgent signal is required for timing, scheduling, paging, general alarm, and warning.

Edwards 870P/871P Series Horns Distributors
870P/871P Series

Edwards Signaling 870P AC & 871P DC Series are low-current, high decibel panel mount vibrating horns for heavy-duty use. Supplied complete with gasket and UL listed to NEMA 4X enclosure requirements. Designed for semi-flush panel mounting, using supplied mounting template, or installation on a 4" (102mm) square box. For NEMA 4X installation, mount to a NEMA 4X enclosure having a flat, smooth surface using supplied 1/8" (3mm) gasket in accordance with the installation instructions provided with the unit. Applications include use in panel boards and switchboards wherever a distinctive, urgent signal is required for timing, general alarm & warning. 872-PO Plastic Projector AdaptaHorn Accessory snaps onto any AdaptaHorn. Available as separate item.

Edwards 872/873 Series Horns Distributors
872/873 Series

Edwards Signaling 872 AC & 873 DC Series are low-current, high decibel single projector vibrating horn for heavy-duty use. The single projector is designed to channel sound in one direction without decibel loss. Supplied complete with Adaptaplate for easy installation. Supplied Adaptaplate allows quick plug-in connection. Horn simply plugs into receptacle on mounting plate. See Adaptahorn installation and Accessories page. Also mounts on any single gang, 3 1/4" (83mm), 3 1/2" (89mm), 4" (102mm) octagon, or 4" (102mm) square box. Used in industrial, commercial, and instituational applciations for timing, paging, and alarm signaling.

Edwards 872DPO/873DPO Series Horns Distributors
872DPO/873DPO Series

Edwards Signaling 872DPO AC & 873DPO DC Series are low-current, high decibel double projector vibrating horns for heavy-duty use. The double projector is designed for bi-directional signaling without decibel loss. Supplied complete with Adaptaplate for easy installation. Supplied Adataplate allows quick plug-in connection. Horn simply plugs into receptacle on mounting plate. Also mounts on any single gang, 3 1/4" (83mm), 3 1/2" (89mm), 4" (102mm) octagon, or 4" (102mm) square box. Used in industrial, commercial, and institutional applications for timing, paging, and alarm signaling. Typical applications include signaling equipment malfunction, security, and employee communication.

Edwards 874/875 Series Horns Distributors
874/875 Series

Edwards Signaling 874AC & 875 DC Series are low-current, high decibel surface mount vibrating horns for heavy-duty use. Supplied complete with Adaptaplate for easy installation. Supplied Adataplate allows quick plug-in connection. Horn simply plugs into receptacle on mounting plate. Also mounts on any single gang, 3 1/4" (83mm), 3 1/2" (89mm), 4" (102mm) octagon, or 4" (102mm) square box. Used in industrial, commercial, and institutional applications for timing, paging, and alarm signaling. Applications include equipment malfunction alert and security warning. 872-PO Plastic Projector AdaptaHorn Accessory snaps onto any AdaptaHorn. Available as separate item.

Edwards 876/877 Series Horns Distributors
876/877 Series

Edwards Signaling 876 AC & 877 DC Series are low-current, high decibel, vibrating horns for heavy-duty use and is UL listed to NEMA 4X enclosure requirements. The die-cast weatherproof box has a durable, corrosion resistant, electrostatic heat flowed powder epoxy gray finish. May be used for indoor applications. Mount on conduit or to any flat surface. A hole on the top has been drilled and tapped for 3/4" (19mm)-14 NPT conduit. Knockouts are located on the bottom and rear of the unit. Used where a distinctive, urgent signal is required for outdoor or weatherproof requirements such as: timing scheduling, paging, general alarm, personnel warning, and emergency evacuations. 872-PO Plastic Projector AdaptaHorn Accessory snaps onto any AdaptaHorn. Available as separate item.

Edwards 878DEX/879DEX/888D & 889D Series Horns Distributors
878DEX/879DEX/888D & 889D

Edwards Signaling 878DEX, 879DEX, 888D and 889D Series are diode polarized, heavy-duty, high decibel, vibrating horn signals. They are intended for use in hazardous locations requiring electrical supervision of signaling circuit field wiring. For non-fire alarm applications, horns have a NEMA type 4X rating and may be used outdoors (recommended above temperatures of +25F). Two mounting brackets are provided on either side of the unit for wall mounting. The housing is tapped on one side for 3/4" (19mm) conduit to allow for field wiring installation. For use in dusty, hazardous atmospheres where a distinctive, urgent signal is required. Typical applications include use in mines, petroleum plants, gas plants, grain elevators, flour mills, paper mills, textile plants and tankers.

Edwards 878EX/879EX Series Horns Distributors
878EX/879EX Series

Edwards Signaling 878EX AC & 879EX DC Series are heavy-duty, high decibel, vibrating horn signals designed for use in hazardous locations. Two mounting brackets are provided on either side of the unit for wall mounting. The housing is tapped on one side for 3/4" (19mm) conduit to allow for field wiring installation. For use in dusty, hazardous atmospheres where a distinctive, urgent signal is required for timing, scheduling, paging and general alarm applications. Typical applications include use in mines, petroleum plants, gas plants, grain elevators, flour mills, paper mills, textile plants and tankers.

Edwards B-KM-8130 Series Horns Distributors
B-KM-8130 Series

Edwards Signaling B-KM-8130 Series is a heavy-duty, high decibel, vibrating horn signal designed for use in hazardous locations. Two mounting lugs are provided on either side of the unit for wall mounting. The housing is tapped on one side for 1/2" (13mm) conduit to allow for field wiring installation. Ideal for use where sound projection in a single direction is required or specified in hazardous atmospheres where explosion proof and dust tight features are required.

Edwards Adaptabel Accessories Distributors
Adaptabel Horn Accessories

Edwards signaling adaptabel accessories are for use with 332, 333, 340, 435 and 439D bells. These bell accessories are used to add to the funcionality or look of the bell. Edwards Signaling 348, 349 and 449 back boxes are constructed of rugged die-cast aluminum and when used with any 340, 435 or 439D bell they are UL Listed for outdoor use. Edwards signaling flush mount grilles and wall boxes are provide flush mounting for any 4", 6" or 10" Adaptabel. The grilles have a flat white finish and are ideal for use in offices where a more subtle look is desired. The grilles also provide protection against tampering and vandalism, as the bell is completely covered. The wall box has a gray enamel finish and must be ordered separately. 512-A may also be used with 338 & 339 Series chimes.