Incremental Shaft

Accu-Coder incremental shaft encoders provide position information for a rotating shaft by producing a continuous series of pulses. These pulses correspond to increments of resolution on the code disk. Incremental shaft encoders are the most widely applied industrial encoders in the world, with an extensive range of form factors and output types. EPC offers a broad array of incremental shaft encoders suitable for applications ranging from fine instrument control to rugged, industrial heavy duty feedback.

Accu-Coder 15S Incremental Shaft Encoders Distributors
15S

Encoder Products Company Model 15S Accu-Coder™ offers a high performance feedback solution in a low profile package, making the Model 15S ideal for commercial and light-duty industrial applications. This industry standard Size 15 (1.5" diameter) encoder features a precision bearing set, sealing available to IP64, a durable stainless steel shaft, and a selection of servo, flange, and face mount options. The Model 15S may also be specified with features such as extended operating temperatures from -40° to 120° C, or up to 12 pole commutation for brushless motor control. The Model 15S features EPC's Opto-ASIC circuitry for a clean, reliable signal. Its durable yet economical design makes it an ideal encoder for high precision OEM applications.

Accu-Coder 25SF Incremental Shaft Encoders Distributors
25SF

Encoder Products Company Model 25SF Size 25 Accu-CoderPro™ shaft encoder offers the performance advantages of the programmable Model 25SP, but in an economical, fixed resolution version. The versatile Model 25SF offers 32 different waveforms options, 6 output types, and any resolution from 1 to 65,536 CPR. Specifically designed for the challenges of an industrial environment, the Model 25SF features a rugged, industrial housing and comes standard with dual bearings rated 80 lbs axial or radial. Offering shaft sizes up to 10 mm, multiple mounting options, and sealing up to IP67, this encoder can take on your most demanding application.

Accu-Coder 25SP Programmable Incremental Encoders Distributors
25SP

Encoder Products Company Model 25SP Programmable Size 25 Accu-CoderPro™ shaft encoder is specifically designed for the challenges of an industrial environment. But don't let the tough exterior fool you - contained within the rugged, industrial housing is an advanced set of electronics that allow the encoder to be programmed to your exact application needs. Using EPC's optional programming module, users may select the output type, more than 30 different waveforms and any resolution from 1 to 65,536 CPR - that's 262,144 counts using 4x quadrature counting. These programming features allow a single encoder to be configured for multiple applications, enabling one encoder to replace many different part numbers, providing cost savings on inventory and down-time replacement. The 25SP can also be configured and shipped with specs pre-programmed, no on-site programming needed. The Model 25SP Accu-CoderPro™ comes standard with dual bearings rated 80lbs axial or radial, and may be specified with up to IP67 sealing. Some configurations are in stock and ready to ship.

Accu-Coder 702 Incremental Shaft Encoders Distributors
702

Encoder Products Company Model 702 Size 20 Accu-Coder™ is a heavy duty, extremely rugged, reliable, yet compact industry standard 2" diameter encoder, designed for harsh factory and plant floor environments. The double-shielded ball bearings are rated at 80 lb maximum axial and radial shaft loading to ensure a long operating life. Made to withstand the harsh effects of the real world, both the flange and servo models are rated IP67 with the optional heavy duty shaft seal. With a variety of mounting options in both the flange and servo models, the Model 702 is ideal for both new applications and replacements. If you need an encoder that won't let you down, the Model 702 is it.

Accu-Coder 711 Incremental Shaft Encoders Distributors
711

Encoder Products Company Model 711 Accu-Coder™ is the original, industry standard cube encoder. Designed for compatibility with most programmable controllers, electronic counters, motion controllers, and motor drives, it is ideally suited for applications that require a simple, symmetrical, unidirectional square wave output in a single channel format. Critical performance specifications for the most popular resolutions and advanced Opto-ASIC circuitry — a single chip design that eliminates many board level components - increases the reliability of an already dependable and durable encoder. With new options continually being added, the Model 711 excels in a wide variety of industrial applications.

Accu-Coder 715 Incremental Shaft Encoders Distributors
715

Encoder Products Company Model 715 Accu-Coder™ is ideally suited for applications requiring bi-directional feedback with a constant pulse width. The Model 715 is available in two versions. The Model 715-1 provides output pulses for clockwise shaft rotation on one channel and pulses for counterclockwise rotation on another. The Model 715-2 provides output pulses for counting on one channel while the other channel indicates direction of rotation. Critical performance specifications for the most popular resolutions and advanced Opto-ASIC circuitry - a single chip design that eliminates many board level components - increases the reliability of an already dependable and durable encoder. With new options continually being added, the Model 715 excels in a wide variety of industrial applications.

Accu-Coder 716 Incremental Shaft Encoders Distributors
716

Encoder Products Company Model 716 Accu-Coder™ is ideally suited for applications requiring a quadrature output. Designed for compatibility with most programmable controllers, electronic counters, motion controllers, and motor drives, it is ideally suited for industrial applications where it is important that the direction of rotation be known. Critical performance specifications for the most popular resolutions and advanced Opto-ASIC circuitry - a single chip design that eliminates many board level components - increase the reliability of an already dependable and durable encoder. With new options continually being added, the Model 716 excels in a wide variety of industrial applications.

Accu-Coder 725 Incremental Shaft Encoders Distributors
725

Encoder Products Company Model 725 Size 25 Accu-Coder™ optical shaft encoder is specifically designed for the challenges of an industrial environment. But don't let its tough, industrial package fool you - it still has the performance to reach resolutions up to 30,000 cycles per revolution. The Model 725 offers both flange and servo mounting options, and is available in two distinctive housing styles. The rugged Standard Housing (N) isolates the internal electronics from the shock and stress of the outer environment. The extra-heavy-duty Industrial Housing (I) features a fully isolated internal encoder unit that prolongs bearing life by using an internal flexible mount to protect the encoder from severe axial and radial shaft loading. The Industrial Housing option is the recommended solution for applications subject to continuous side loads, such as those that drive the encoder with a measuring wheel, pulley, or chain and sprocket.

Accu-Coder 755A Incremental Shaft Encoders Distributors
755A

Encoder Products Company Model 755A Size 15 Accu-Coder™ is ideal for applications requiring a small, high precision, high performance encoder. Approximately 1.5" in diameter and 1.5" long, it will fit where many encoders cannot. Designed with all-metal construction and shielded ball bearings, it will provide years of trouble-free use. The standard servo mount (S) version is available with a variety of shaft sizes and lengths. Three additional servo style mounts (S1, S2, S3) are also available. The optional flange mounting (MF) is ideal for applications requiring a bolt-on, high precision encoder. With its high reliability and quick delivery, the Model 755A encoder is the perfect replacement encoder in this size category.

Accu-Coder 758 Incremental Shaft Encoders Distributors
758

Encoder Products Company Model 758 Size 58 Accu-Coder™ is a heavy duty, extremely rugged, reliable, yet compact European standard 58 millimeter diameter encoder, designed for harsh factory and plant floor environments. Shaft loading is no problem for the double-shielded ball bearings; their 80 lb load rating ensures a long operating life. With the optional heavy-duty shaft seal, the Model 758 is rated IP67. Two European standard mounting options are available: Clamping Flange (20 Type) or Synchro Flange (26 Type). The Model 758 is the perfect replacement encoder for units requiring the European mount.