Designed with attention to every detail, IDEC relays are manufactured to ensure precision and quality. Correlating sockets include multiple features for ease-of-use and can be DIN rail, panel or PCB mounted. Each socket is designed to work with IDEC IZUMI timers and relays, but will work equally well with any fitting component.

IDEC RF Series Force Guided Relays Distributors
RF Series

IDEC force-guided relays are key electromechanical switching components, providing a failsafe within safety circuits and detecting failures such as contact welding or damage to the contact spring failure. Often used in combination with elevator controls, interlock switches, light curtains and emergency stop switches, these relays are crucial in safety control applications. Our popular RF1V force-guided relays are ideal for applications requiring additional contacts for an HR1S Safety Relay or an FS1A Safety Controller. IZUMI RF1V series is a cost-effective and easy method to expand mechanical contact outputs. In combination with the SF1V series of mounting sockets, these relays be mounted on a panel, DIN rail or PC board. Available as a plug-in (RF2S) or pc board (RF2V), RF2 force-guided relays are ideal if you only need two contacts or if you want to add multiple relays in a series. In combination with the SJ series of finger-safe sockets, these compact relays provide reliable safety for man and machine in the event of a malfunction, while cutting down on cost and installation space.

IDEC RH Series General Purpose Relays Distributors
RH Series

Featuring the same contact ratings as the larger RR series, IDEC RH series uses silver cadmium oxide contacts to help reduce voltage arcing. Available in 1 to 4 poles, with either .187" blade plug-in or PCB terminals, the RH series is known for going the distance. Options include manual check buttons, LED indicators, and top flange covers for direct surface mounting. All IZUMI models carry worldwide approvals including UL, CSA, TUV and CE. Using a standard terminal arrangement, the RH series will plug into many competitors' sockets. In fact, since we private label sockets for so many companies, there is a good chance that the socket you are using was designed specifically for RH series relays.

IDEC RJ Bifurcated Series General Purpose Relays Distributors
RJ Bifurcated Series

IDEC RJ22 model has a maximum contact rating of 1amp at 250V AC, while maintaining a minimum switching load of 100uA 1V DC, allowing customers to use this relay for their dry circuit switching needs. With the shortest width on the market RJ bifurcated relays are durable, compact and available with plug-in or PCB terminals. A non-polarized green LED indicator is available (except on the simple type), utilizing IDEC’s unique light-guide structure to enable these relays to be identified by the illuminated green LED. Diode, reverse polarity diode, and RC circuits are also available with peak inverse voltages of 1000V. Like the rest of the RJ family, RJ22 PCB bifurcated relays have been manufactured with attention to even the smallest details. Using our automated manufacturing technologies, an innovative design was utilized in the internal construction of moving parts ensuring the highest-quality, reliable relays. This includes a unique return spring structure eliminating unnecessary weak points, allowing for increased electrical conductivity and longer service life. Both DPDT and DPST-NO contact configuration types are available in a flux-tight structure. RJ Plug-in and PCB Terminal relays (with bifurcated contacts) are UL recognized, CSA certified, VDE approved and CE marked. Correlating sockets include multiple features for ease-of-use. Sockets can be DIN rail, panel mounted or PCB mounted. IZUMI DIN rail/panel mount socket can be ordered with IEC finger-safe terminals, where coil and contact terminals are on opposite sides of the socket. The PCB mount socket allows you to replace a relay without having to de-solder.

IDEC RJ PCB Series PCB Relays Distributors
RJ PCB Series

IDEC RJ PCB relays, the newest addition to our relay family, were designed with the same attention-to-detail IDEC is known for. The most recent IDEC IZUMI innovation is a return spring structure for the RJ PCB relays that eliminates unnecessary weak points improving durability, and increasing electrical conductivity and service life.

IDEC RJ Series General Purpose Relays Distributors
RJ Series

IDEC RJ relays were designed with the same attention-to-detail IDEC is known for. The most recent IDEC innovation is a return spring structure for the RJ relays that eliminates unnecessary weak points improving durability, and increasing electrical conductivity and service life. Available in both Plug-in blade or PCB type, SPDT or DPDT (Form A or Form C) configuration, and up to 16A rated contact, there are no regrets once you design in an IZUMI RJ relay. Unique light guide to give you a brighter and more noticeable status indicator from multiple directions. Unique return spring structure allows usage for better materials thus higher contact rating. With 3 times the life expectancy of similar units, you worry less about maintenance and replacing relays. Matching sockets are available. Din-Rail or Panel Mount comes in screw terminal or IEC finger safe models. PCB socket allow you remove relay easily from printed circuit board.

IDEC RL Series General Purpose Relays Distributors
RL Series

Designed with a 1- and 2-pole 3HP/277V AC rating in an economical and compact package, 30A RL power relays are the superior choice for HVAC panels, energy management and applications requiring higher voltage loads and inductive kickback. Choose from IZUMI panel or DIN rail mounting. Unlike the competition, when DIN rail mounted, IDEC RL relays don’t require a socket or adaptor. Quick Connect terminals allow faster installation on commercial applications, while screw terminations are ideal for industrial applications.

IDEC RQ Series PCB Relays Distributors
RQ Series

IDEC’s RQ relays are low-profile, PCB relays that provide quality within a compact package. IZUMI RQ relays are small, yet maintain high contact ratings and long operational life. For larger power needs, a 16A model is also available.

IDEC RR2KP Series Latching Relays Distributors
RR2KP Series

IDEC RR2KP Series magnetic latching relays have excellent self-holding performance and operate by pulse input so they maintain conditions even during power failures. They are available in AC and DC coil voltages up to 10A. IZUMI DIN rail and panel mount sockets are available for a wide range of mounting applications.

IDEC RR Series General Purpose Relays Distributors
RR Series

IDEC RR series relays provide reliable switching for industrial loads. Using pure silver contacts, they are rated up to 10A and 240V AC. IZUMI Terminals are available in two styles, 8 or 11 pin tubular (octal) or .187" plug-in. Coil voltages range from 6VDC to 240VAC. Carrying worldwide approvals including UL, CSA, TUV and CE marking (TUV and CE on tubular pin types only), they are ready to travel anywhere your application needs take them. Available options include manual check buttons, LED indicators, or side flange covers for direct surface mounting. When coupled with IDEC's high quality sockets, they form an unbeatable combination.

IDEC RU Series General Purpose Relays Distributors
RU Series

The adaptable IDEC RU series are available in either 2 pole (DPDT) or 4 pole (4DPDT) models. Both RU2 and RU4 models have multiple standard features, including a non-polarized green indicator LED, a mechanical indicator flag, an easily accessible and replaceable marking plate, and a manual latching lever, coded orange/red for AC coil and green/blue for DC coil. What sets the RU relays apart from other relays is the unique internal construction. There is no internal wiring, which means no weak solder points and a completely lead-free manufacturing process. IZUMI contacts are cadmium-free as well, making the RU relays environmentally-friendly. All RU relays are also manufactured by a totally automated assembly process which means the relay is of the highest quality because the possibility of human error has been eliminated during the manufacturing process. IDEC has developed an innovative and simple method of identifying the RU series of relays. Several different colored marking plates are now available that can be used to replace the standard marking plate found on the top of the RU relay. These marking plates are available in yellow (standard color), green, orange, blue or white. In addition, the marking plates can be further identified by using either a pencil or pen to write directly on them. You can, in effect, create your own customized label that is actually part of the relay. The marking plates are located on the top of the relay rather than on the socket. In addition, IDEC has developed the RU relay with low signal switching bifurcated contacts. The RU42S model has a maximum contact rating of 3 amps 250V AC while maintaining a minimum switching load of 0.1mA @ 1V DC, allowing you to use this relay for all your dry circuit switching needs.

IDEC RV8 Interface Series General Purpose Relays Distributors
RV8 Interface Series

IDEC interface relays provide a compact solution for general purpose relay requirements. The RV8 series interface relays are ideal for PLC and other controller output, industrial automation, panel builders, assembly machine applications and other applications that require a high switching capability in a compact space. IZUMI RV8 relays can be used as a universal interfaces between the controller and the actuator to switch small and medium size loads.

IDEC RY2KS Series Latching Relays Distributors
RY2KS Series

IDEC RY2KS a miniature latching relay with a 14-pin ice cube base and DPDT contact configuration. Pulse input operation maintains conditions even during power failures. IZUMI DIN rail, PCB, and panel mount sockets are available for a wide range of mounting applications.

IDEC RY-RM Series General Purpose Relays Distributors
RY-RM Series

IDEC RY/RM series of relays satisfy applications for lower level switching needs such as pilot lights or logic level devices. The RY has standard gold plated contacts to prevent contact oxidation from affecting circuit continuity, while optional Palladium alloy bifurcated contacts reduce contact bounce and allow circuit switching in the micro-amp range. Terminated with a standard footprint of blade plug-in terminals or with PCB pins, the RY/RM series fit into many competitors' sockets as well. Available in 4PDT or two different arrangements of DPDT: IZUMI RM2 uses the same socket as the RY4, but the RY2 is a true two pole relay that occupies half the width of the four pole. Available options include manual check buttons, LED indicators, or top flanged dust covers for direct surface mounting.