Fairchild Model 200 Pneumatic Volume Booster 1:1 ratio

200112-FAIRCH
$1,027.09 / EA
In Stock
  • Refine Search: Industrial
  • Product Type: Volume Booster
  • Manufacturers: Fairchild
  • Product Family: Model 200
  • Accuracy: 0.50 psi
  • Flow Capacity: 1800 SCFM (3058 M³/HR)
  • Max. Output Pressure: 150 PSIG
  • Max. Supply Pressure: 250 PSIG
  • Ambient Temperature: -40 F (-40 C) to 200 F (93.3 C)
  • Base Model: 20012
  • Body Material: Aluminum
  • Elastomer: Nitrile on Dacron
  • Exhaust Capacity: 65 SCFM [110.5m3/Hr] where downstream pressure is 5 psi above 20 psi setpoint
  • Exhaust Type: Straight (standard)
  • FlowCv: 18
  • Mounting: Line
  • Operator: Pneumatic pilot signal
  • Options: None
  • Ratio: 1:1
  • Signal to Output Pressure Ratio: 1:1
  • Sensitivity: 1 in WC
  • Pipe Size: 1.5 FPT
  • Pressure Range: 0-150 psi
  • Supply Pressure: 250 psi
  • Flow Capacity: 1800 SCFM
Fairchild Model 200 Pneumatic Volume Booster, 1:1 ratio, 250 psi [17 BAR] supply, 1800 SCFM [3058m3/Hr]@150 psi supply/20 psi set, 150 psi [10 BAR] max output, 1.5 FPT line, 1/4 FPT gauge, 1/4 FPT signal, Nitrile on Dacron.
QTY
  • Product Description
  • Dimension Drawing
The Rotork Fairchild Model 200 Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1 ratio. It is ideally suited for systems that require input isolation or increased forward flow capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. With its a pilot operated regulator design, the M200 handles up to 250 psig [17 BAR] (1700 kPa) supply pressure and provides a flow Ultra high Flow capacity of 1800 SCFM [3058m3/Hr], which equates to a Cv factor of approximately 18 in forward flow mode.
  • Ultra fast responsive operation
  • Allows use in precision applications
  • Isolates the diaphragm from the main flow to eliminate hunting and buzzing
  • Provides more precision control at low setpoints
  • Easy installation in the field
  • Allows servicing the Model 200 using Service Kit without removal from line
  • Certification for use in all Canadian territories and provinces
NOTES: Oil free air must be applied to the regulator. Use a filter to remove dirt and entrained liquid in the air line ahead of the regulator. If an air line lubricator is used, it MUST be located downstream of the regulator, to avoid interference with regulator performance.