Sometimes, applications require more protection and TURCK provides the answer with an offering of barriers and isolator technologies for both hazardous and non-hazardous applications. All models are equipped with a two-line transflective LCD display, making it easy to read even in very bright light. The modules also incorporate a universal supply voltage and removable terminals, making them easy to install in new or existing systems.
TURCK IMX12-CCM (Cabinet Condition Monitoring) can be installed in virtually any cabinet or any protective enclosure to ontinuously check the current protection degree there - even retrospectively. The DIN rail device notifies with a switching signal improperly closed doors, as well as exceedances of temperature and interior humidity, to the control system.
TURCK supplementary components to complete your application requirements. TURCK offers a large selection of accessories for operation, mounting and protection of interface technology products.
TURCK’S new interface module cartridge (IMC) series is another innovative breakthrough in process automation: The I.S. barrier is moved from the mounting cabinet directly to the installation, thus making it possible to create further decentralized structures in the installation. The exceptional compact and rugged device series creates new options and possibilities for the user: In addition to your standard mounting cabinet solution, increase the flexibility of your system by using TURCK interface module cartridges.
To simplify device set-up and installation time, TURCK’S interface module (IM) family may now be programmed via a pc or on-board push buttons using FDT/DTM software, along with PACTware. This software allows multiple parameters to be set and saved in a matter of seconds. The ease of use and structure of this system allows asset management ability with trending and data logging of values. TURCK’s IM modules may be used to monitor the speed of motors, shafts and conveyors, the temperature of RTD’s and thermocouples, and to control or monitor analog signals for linear movement, temperature, pressure, level control or any other device using 4 to 20 mA signals. Intrinsically safe models to control devices in hazardous areas are also available. All models are equipped with a two-line transflective LCD display, making it easy to read even in very bright light. The modules also incorporate a universal supply voltage and removable terminals, making them easy to install in new or existing systems.
TURCK safety barriers electrically isolate your signals with a form factor to fit your appliction. Intrinsically safe circuit is a circuit in which any spark or thermal effect is incapable of causing ignition of a mixture of flammable or combustible material in air under prescribed conditons. (NEC 504-2).
TURCK signal conditioner converts or amplifies a variety of signals. TURCK introduces the new IMS interface module measuring merely 6.2 mm wide. The module may be configured with a laterally mounted DIP switch for added convenience. This extremely compact module provides complete galvanic isolation, up to 2.5 kV between the input, output and power supply. Galvanically isolated IMS modules are available with dead-zero to live-zero signal conditioning, or one and two channel modules are available without signal conditioning. Modules are also available for temperature detection using Pt-100 technology or other thermo-elements. Those that use Pt-100 technology achieve 0.3 percent of the full scale, and are available with 2-, 3- or 4-wire connections. An analog signal transmitter that achieves 0.1 percent of the full scale completes the IMS line.
TURCK zener barriers limit the energy in to and out of the hazardous location. TURCK zener diode barriers can be used for temperature monitoring and control of equipment and their surrounding areas with RTD’s and thermocouples. TURCK zener diode barriers control or monitor all other analog signals for linear movement, temperature, pressure, level control or any other device using 4-20 mA signal feedback.