Pressure sensors from TURCK capture relative or absolute pressures in liquids and gases. The PS series offers display, showing measuring ranges from vacuum to 600 bar. Outputs include set point, analog, and IO-Link. The PT series are transmitters without displays, measuring from vacuum to 7,500 PSIG. Outputs include 2 wire current and 3 wire analog voltage. The PK series offers display, and is specially designed for pneumatic or vacuum applications. Measuring ranges are either vacuum or 145 PSIG, with dual PNP outputs. The PC series are pressure switches with dual PNP outputs or IO-Link communication.
TURCK PS300 series of pressure sensors designed for hydraulic applications feature rugged, IP69k rated design to withstand harsh environments. PS300 sensors provide a wide measuring range, from 3 to 400 bar. Signals are directly processed on the PS300’s newly developed pressure measuring cell, and then digitally transferred to the sensor’s fully potted, self-contained display. This design offers a high level of EMC resistance and an excellent switch point accuracy of 0.5 percent of the full scale. PS300 sensors are available in male or female 1/4" NPT or G1/4" thread versions, with digital or analog (voltage or current) outputs for all measuring ranges. Bonded seals ensure a reliable process connection for high-accuracy measurements. The sensors support the I/O-Link communications standard, allowing processing data to be transferred via a digital output.
TURCK PS500 pressure sensor is a robust pressure transmitter with display for use in hydraulic applications where constant alternating pressure levels strain the measuring cells, sealing material and the housing itself. TURCK designed its PS500 series with a ceramic measuring cell that provides overpressure capability, drift performance and a fast reaction time.
TURCK introduced its submersible pressure transmitter to meet the increasingly difficult level detection challenges presented in industrial environments, like tanks containing liquids such as gas and diesel, or wastewater and irrigation systems. TURCK’s PT4510 submersible pressure transmitter was designed for low level applications of up to 400 inches, while the PT4500 is available in ranges up to 100 psig. The PT4500 and PT4510 submersible pressure transmitters are used to detect the level of water or other media with similar density by placing the transmitter at the bottom of the tank holding the liquid. These transmitters convert the pressure reading to an analog 4-20 mA output signal. The electrical connection to the transmitter is routed through the top of the tank and contains power and signal wires, as well as a breathing tube used as a reference port to determine the atmospheric pressure outside of the tank. These IP68 rated stainless steel pressure transmitters may be used in industrial applications, as well as hazardous classified areas. The sensor carries a UL/cUL 913 approval for use in Class I, Division 1, Groups C and D locations when installed with an approved barrier, such as TURCK’s IM33 series.